12
Weighing in Percent
Purpose
This application program allows you to obtain weight
readouts in percent which are in proportion to a
reference weight.
Available Features
Store the current weight value to have it loaded
as the preset reference percentage next time you
initialize the Weighing in Percent application
The reference percentage can be changed
in the operating menu:
See Configuring the Balance/ Scale
The reference percentage is automatically
output via the optional data interface port after
initialization, if the menu code for Printout
with data ID codes is set
Press v to toggle the display between
percentage and weight
Factory Settings
Reference percentage: 10 (menu code 3. 3. 2)
Preparation
Configure the Weighing in Percent application
in the operating menu:
See Configuring the Balance/ Scale
Menu code 2. 1. 5 Weighing in percent
Reference percentage:
Menu code 3. 3. 1 5 %
Menu code 3. 3. 2 10 %
Menu code 3. 3. 3 20 %
Menu code 3. 3. 4 50 %
Menu code 3. 3. 5 100 %
See also Configuring the Balance/ Scale
To Next Page
Loading...
