Example: Setting the time, date and display brightness
Step Key (or instruction) Display
1. Switch off the balance. (E)
2. Switch the balance on; (E)
while all segments
are displayed: (F) briefly
--------
$ To move the cursor within (A) --------
ID number: repeatedly
$ ITo set or change ID: (CAL)
-3------
repeatedly
3. Confirm ID and activate (TARE)
H10.14.11
time setting.
4. Select 24-hour clock (“H") or
112-hour clock (“P"). (CAL)
H10.14.19
5. Toggle between hours, (A) H10.15.19
minutes, seconds and 12-hour
or 24-hour time mode.
6. Synchronize seconds with
a reference clock. (CAL)
H10.15.00
7. Confirm time and activate date. (TARE) 29.jan.01
8. Set date (CAL) repeatedly,
“Day", (A)
01.jan.01
“Month", and , (CAL) repeatedly
(A)
22.apr.01
if desired, “Year". (CAL) repeatedly
Confirm date and activate
display brightness. (TARE)
22.apr.01
34
To Next Page
Loading...
Need help?
General
