Weighing in Percent
44
Preparation
Set parameters for the Weighing in
Percent program:
$ Select the application program in the
Setup menu
§ Set the following parameters:
2 Application programs
2 1 Program selection
2 1 5 Weighing in percent*
3 Application parameters
3 5 Storage parameter
3 5 1 ο Standard resolution
(internal resolution)
3 5 2 10+ higher resolution
3 6 Decimal places for calc.
3 6 1 None
3 6 2 ο 1 decimal place
3 6 3 2 decimal places
3 6 4 3 decimal places
ο = Factory setting
* = Not in CPA…-PCE models
Menu code: 2 1 5 *
Display symbol: %
Purpose
This application program allows you to
obtain weight readouts in percent which
are in proportion to a reference weight.
Printout: Weighing in Percent
pRef + 100 % : Reference percentage
Wxx% + 111.6 g: Reference weight net xx%
Prc + 94.7 %: Calculated percentage
To Next Page
Loading...
Need help?
General
