Preparation
Set parameters for net-total formulation:
§ Set parameters for automatic printout when
component stored
2 Application programs
2 1 Program selection
2 1 6 * Net-total
7 Print for application
7 1 Print application parameters
7 1 1 Off
7 1 2 ο On; all parameters
7 1 3 On; main parameters only
7 3 Printout of net-total formulation data
7 3 1 ο Autom. print of last net value
7 3 2 Autom. print of tare value
ο = Factory setting
* = Factory setting on CPA…-PCE models
38
Printout of Net-total Formulation Data
COMP2 + 278.1 g: Second component
T COMP+ 2117.5 g: Sum of components
T1 + 1821.5 g: Tare weight (2
nd
tare memory)
N1 + 278.1 g: Net weight = Gross – tare
2
nd
tare memory
N + 2099.6 g: Net weight = Gross – tare
To Next Page
Loading...
Need help?
General
