Name: Sartorius Cubis MCA5203S Series
Brand: Sartorius
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Operating Instructions Cubis

MCA 123

Conformity Documents

18.2 UK Declaration of Conformity

Table of Contents3
About These Instructions7
Scope7
Symbols Used7
Warnings in Operating Instructions7
Other Symbols8
Target Groups8
Safety Instructions9
Intended Use9
Modifications to the Device9
Repairs to the Device9
Personnel Qualification10
Significance of These Instructions10
Functionality of the Device10
Safety Information on the Device10
Electrical Equipment11
Damage to the Device's Electrical Equipment11
Working on the11
Device's Electrical Equipment11
Power Supply Unit11
And Power Supply Cable11
Conduct in an Emergency11
Accessories, Consumables12
And Spare Parts12
Glass Breakage12
Device Description13
Device Overview13
Draft Shield14
Weighing Pan15
And Associated Components15
Connections and Components16
On the Weighing Module16
Analytical Balance16
And Precision Balance16
Semi-Microbalance17
With Electronics Module17
Connections and Components17
On the Electronics Module17
Connections on the Display and Control Unit18
Safety Equipment18
Protective Caps on the Analytical Balance and Precision Balance18
Protective Caps on the Electronics Module19
Conformity-Assessed Devices20
Symbols on the Device20
Operating Design21
Operating Elements in the Main Menu21
Operating Elements in Task Management22
Operating Elements22
In the Weighing Display23
Advanced Operator Guidance24
Messages25
Status Center26
Keypad27
Status Display of the Buttons27
Buttons in the Operating Display28
Buttons for Navigation or Organization in Displays28
Buttons for Editing29
Or Managing Entries29
Buttons for Weighing, Printing, and Export Functions30
Displays in the Operating Display32
User Management33
User Profiles33
User Login33
Weighing and Print Profiles33
Tasks and Applications33
Menu Structure34
Main Menu34
Settings" Menu35
Navigating the Menus41
Installation43
Scope of Delivery43
Selecting an Installation Site44
Unpacking the Device44
Removing the Display and Control Unit45
Positioning the Display and Control Unit45
Connecting the Ethernet Cable46
Preparing Below-Balance Weighing46
Installing a Device with an Analytical Draft Shield or Flat Glass Draft Shield48
Positioning the Weighing Pan and Associated Components48
Installing the Analytical Draft Shield49
Installing the Flat Glass Draft Shield50
Installing a Device50
With a Frame Draft Shield50
Positioning the Weighing Pan and Associated Components50
Connecting the Electronics Module51
(Only for Semi-Microbalance)51
Installing Palm-Operable Keys51
Motorized Draft Shield)51
Setting up the Cable Entry (Only for Devices with a Manual Analytical Draft Shield)52
Acclimatization53
Getting Started54
Installing the AC Adapter54
Connecting the Power Supply55
Attaching the Protective Caps55
System Settings56
Performing System Settings56
Switching off the Isocal Function56
Assigning a Password57
Opening the Help Function57
Setting up Device for Network Printer57
Selecting Configuration57
For Network Printing57
Setting up Device for Network Printer Via Independent Wi-Fi Network58
Setting up Device for Network Printer58
Via Company Network59
Configuring Print Profiles60
Descriptions of Interface Protocols60
And Website Certificates60
Parameter List61
Parameters in the "User Management" Menu61
Parameters in the "Access Management" Menu61
Parameters in the "Timer-Controlled Actions" Menu62
Parameters in the "Weighing and Print Profiles63
Weighing" Menu63
Parameters in the "Weighing and Print Profiles / YDP30, PC Direct66
Or SBI Direct" Menu66
Parameters in the "Weighing and Print Profiles / PDF or CSV" Menu68
Parameters in the "Connections / Connectors" Menu69
Parameters in the "Connections / Network" Menu70
Parameters in the "Connections / Website / Web Services" Menu71
Parameters in the "Connections / Certificates" Menu71
Parameters in the "Connections / Interfaces / Serial Communication over Network" (Ethernet) Menu72
Parameters in the "Connections / Interfaces / COM-RS232 Interface72
Menu72
Parameters in the "Connections / Interfaces / USB-B Interface74
Menu74
Parameters in the "Connections75
SBI Protocol" Menu75
Parameters in the "Connections / Climate Modules" Menu75
Parameters in the "Connections / Connected Devices / Motion Sensor" Menu76
Motion Sensors)76
Parameters in the "Connections / Connected Devices / External USB Keys (Only for Connected Peripheral Device)" Menu77
Parameters in the "Device Settings77
Date and Time" Menu77
Parameters in the "Device Settings / Safe Weighing" Menu78
Parameters in the "Device Settings79
Preload" Menu79
Parameters in the "Device Settings / Calibration / Adjustment Report79
Menu79
Minusp" Menu79
Parameters in the "Device Settings80
Parameters in the "Device Settings / Measurement Uncertainty" Menu80
Device ID" Menu80
Parameters in the "Device Settings / Draft Shield" Menu (Only for Devices with a Motorized Draft Shield)81
Parameters in the "Device Settings / Electronic Signature" Menu81
Parameters in the "Device Settings / Ionizer" Menu81
With an Ionizer)81
Parameters in the "Device Settings / Start-Up Behavior" Menu82
Parameters in the "Device Settings / Display Properties" Menu82
Parameters in the "Device Settings / Sound (Loudspeaker)" Menu83
Parameters in the "Device Maintenance" Menu83
Operation84
Switching the Device on and off84
Logging Users in and out85
Leveling the Device85
With Motorized Leveling Feet85
Opening and Closing the Motorized Draft Shield86
With a Motorized Draft Shield)86
Opening Draft Shield by Pressing the Palm-Operated Key86
Defining the Opening Width86
Activating Applications and Adding a Task87
Activating Applications87
Adding an Application to a Task88
Adding Weighing and Print Profiles to a Task88
Preparing Weighings88
Weighing89
Overview of Calibration89
Adjustment, and Linearization89
Adjusting with the Isocal Function90
Internally Calibrating91
And Adjusting the Device91
Weighing and Printing with ID Marking91
Saving Values for Printouts91
Marking Saved Values as Invalid92
Marking Saved Values as Valid92
Printing Saved Values92
Exiting the Task93
Viewing the Data Storage Device93
Turning the Ionizer on | off (Only for Devices with an Ionizer)94
Setting the Ionizer94
Starting the Ionization Process94
Switching off the Ionizer94
Running Applications (Examples)94
Executing the "Unit Change" Function94
Running the "Statistics" Application (from QAPP Package "Essentials")95
Cleaning and Maintenance96
Preparing a Device with an Analytical Draft Shield or Flat Glass Draft Shield96
Preparing a Device97
With a Frame Draft Shield97
Cleaning the Device97
Assembling and Connecting the Device98
Maintenance Schedule98
Performing a Software Update99
Performing a QAPP Center Update100
Malfunctions101
Warning Messages101
Troubleshooting101
Decommissioning102
Decommissioning the Device102
Transport102
Transporting the Device102
Storage and Shipping103
Storage103
Returning Device and Parts103
Disposal104
Information on Decontamination104
Disposing of Device and Parts104
Information on Disposal104
Technical Data105
Dimensions and Weight105
Semi-Microbalance105
Analytical Balance105
Precision Balance105
Power Supply106
Device106
AC Adapter106
Safety of Electrical Equipment106
Electromagnetic Compatibility107
Ambient Conditions107
Installation Site107
Ambient Temperature108
For the Isocal Function108
Protection Class108
Materials109
Integrated Clock109
Backup Battery109
Metrological Data110
Models MCA225S | MCA225P | MCA125S | MCA125P110
Models MCA524S | MCA524P | MCA324S | MCA324P111
Models MCA224S | MCA124S | MCA5203S | MCA5203P112
Models MCA3203S | MCA2203S | MCA2203P | MCA1203S113
Models MCA623S | MCA623P | MCA323S | MCA5202S114
Recommended Calibration Weight115
Isocal Function116
Models MCA225S | MCA225P116
Mca1203S116
Models MCA524S | MCA524P116
Mca3203S116
Models MCA623S | MCA623P | MCA323S | MCA5202S116
Data Storage Device116
Interfaces117
Specifications for the COM-RS232 Interface117
Specifications for the USB-A Interface117
Specifications for the USB-B Interface117
Accessories118
Printers and Communication118
Displays and Input | Output Elements119
Hardware for Pipette Calibration119
Filter Balance119
And Antistatic Accessories119
Special Applications119
Weighing Tables120
Weighing Accessories120
Sartorius Service121
Conformity Documents121
EU Declaration of Conformity121
Declaration of Conformity123
Certificate of Compliance124

Sartorius Cubis MCA5203S Series User Manual

Table of Contents

Questions and Answers:

Sartorius Cubis MCA5203S Series Specifications

Related product manuals

Brand	Sartorius
Model	Cubis MCA5203S Series
Category	Laboratory Equipment
Language	English