Sartorius Cubis MCA5203S Series User Manual

66 Operating Instructions Cubis
®
MCA
System Settings
7.7.5 Parameters in the “Weighing and Print Profiles / YDP30, PC Direct, or SBI Direct” Menu
Parameter Setting Values Explanation
GLP print Off* Deactivates the GLP print.
On The GLP print is always switched on. All printouts contain
aGLPheader and a GLP footer.
GLP header
orGLPfooter
(ifGLP print “On”)
Standard elements − Adds elements to or deletes elements from the GLP header:
Dashed line, space line, horizontal line, and signature.
− Changes the sequence of the individual elements.
Device information − Adds elements to or deletes elements from the GLP header:
Device ID 1, device ID 2, package version, last calibration,
manufacturer, minUSP, model name, and serial number.
− Changes the sequence of the individual elements.
Task − Adds elements to or deletes elements from the GLP header:
QAPP version, task name, and user name.
− Changes the sequence of the individual elements.
Date and time − Adds elements to or deletes elements from the GLP header:
Date | time report end, date | time report start, and time zone.
− Changes the sequence of the individual elements.
User text − Prints an entered description, e.g., the name of the
printprofile.
− Adds or deletes up to four user texts.
Measurement
uncertainty
− Adds elements to or deletes elements from the GLP header:
Calibration certificate, accreditation, created by, date,
method, exponent, factor, process accuracy factor,
summand.
− Changes the sequence of the individual elements.
Weight value
printelements
Standard elements − Adds or deletes print elements: Dashed line, date | time
ofapplication, space line, horizontal line, time zone,
andusername.
− Changes the sequence of the individual elements.
Device information − Adds or deletes the print element “Serial number”.
Weighing − Adds or deletes the following print elements: Data storage
device ID, weight value block (gross, net, and tare value
“N,T,GC”), and weight value.
− Changes the sequence of the individual elements.
Measurement
uncertainty
− Adds or deletes the following print elements: Process
accuracy, absolute uncertainty, and relative uncertainty.
− Changes the sequence of the individual elements.
Connectors
(forYDP printer)
YDP30 Displays the activated connector for printing.
YDP30-NET
* Factory setting

Sartorius Cubis MCA5203S Series Specifications

General

Brand	Sartorius
Model	Cubis MCA5203S Series
Category	Laboratory Equipment
Language	English