Sartorius Cubis MCA5203S Series User Manual

4 Operating Instructions Cubis
®
MCA
Contents
5.10 Installing Palm-operable Keys
(Onlyfor Devices with
MotorizedDraftShield).......................51
5.11 Setting Up the Cable Entry
(Only for Devices with a
Manual Analytical Draft Shield) ..............52
5.12 Acclimatization ..............................53
6 Getting Started ...................................54
6.1 Installing the AC Adapter . . . . . . . . . . . . . . . . . . . . 54
6.2 Connecting the Power Supply...............55
6.3 Attaching the Protective Caps...............55
7 System Settings...................................56
7.1 Performing System Settings .................56
7.2 Switching Off the isoCAL Function..........56
7.3 Assigning a Password........................57
7.4 Opening the Help Function .................57
7.5 Setting Up Device for Network Printer.......57
7.5.1 Selecting Configuration
for Network Printing..................57
7.5.2 Setting Up Device
for Network Printer
viaIndependentWi-Fi Network......58
7.5.3 Setting Up Device
for Network Printer
viaCompanyNetwork................59
7.5.4 Configuring Print Profiles ............60
7.6 Descriptions of Interface Protocols
andWebsite Certificates ....................60
7.7 Parameter List ................................61
7.7.1 Parameters in the
“User Management” Menu............61
7.7.2 Parameters in the
“Access Management” Menu .........61
7.7.3 Parameters in the “
Timer-controlled Actions” Menu .....62
7.7.4 Parameters in the
“Weighing and Print Profiles /
Weighing” Menu .....................63
7.7.5 Parameters in the “Weighing and
Print Profiles / YDP30, PC Direct,
or SBI Direct” Menu ..................66
7.7.6 Parameters in the “Weighing and
Print Profiles / PDF or CSV” Menu ....68
7.7.7 Parameters in the
“Connections / Connectors” Menu . . . 69
7.7.8 Parameters in the
“Connections / Network” Menu ......70
7.7.9 Parameters in the “Connections /
Website / Web Services” Menu........71
7.7.10 Parameters in the
“Connections / Certificates” Menu ....71
7.7.11 Parameters in the “Connections /
Interfaces / Serial Communication
over Network” (Ethernet) Menu...... 72
7.7.12 Parameters in the “Connections /
Interfaces / COM-RS232 Interface”
Menu................................. 72
7.7.13 Parameters in the “Connections /
Interfaces / USB-B Interface”
Menu................................. 74
7.7.14 Parameters in the “Connections /
SBI Protocol” Menu ..................75
7.7.15 Parameters in the “Connections /
Climate Modules” Menu .............75
7.7.16 Parameters in the “Connections /
Connected Devices / Motion Sensor”
Menu (onlyforconnected
motion sensors) ...................... 76
7.7.17 Parameters in the “Connections /
Connected Devices / External
USB Keys (onlyforconnected
peripheral device)” Menu .............77
7.7.18 Parameters in the “Device Settings /
Date and Time” Menu .................77
7.7.19 Parameters in the “Device Settings /
Safe Weighing” Menu ................78
7.7.20 Parameters in the “Device Settings /
Preload” Menu .......................79
7.7.21 Parameters in the “Device Settings /
Calibration / Adjustment Report”
Menu.................................79
7.7.22 Parameters in the “Device Settings /
minUSP” Menu.......................79
7.7.23 Parameters in the “Device Settings /
Measurement Uncertainty” Menu....80
7.7.24 Parameters in the “Device Settings /
Device ID” Menu .....................80
7.7.25 Parameters in the “Device Settings /
Electronic Signature” Menu ...........81
7.7.26 Parameters in the “Device Settings /
Draft Shield” Menu (Only for Devices
with a Motorized Draft Shield) ........81
7.7.27 Parameters in the “Device Settings /
Ionizer” Menu (Only for Devices
with an Ionizer) ........................81
7.7.28 Parameters in the “Device Settings /
Start-up Behavior” Menu.............82
7.7.29 Parameters in the “Device Settings /
Display Properties” Menu ............82
7.7.30 Parameters in the “Device Settings /
Sound (Loudspeaker)” Menu.........83
7.7.31 Parameters in the
“Device Maintenance” Menu.........83

Sartorius Cubis MCA5203S Series Specifications

General

Brand	Sartorius
Model	Cubis MCA5203S Series
Category	Laboratory Equipment
Language	English