Sartorius CW3P - Overview of the Setup Menu in Service Mode; Input of the Service Password; Setup Device WP1

17
Overview of the Setup Menu in Service Mode
o = Factory setting
x = User-defined setting
Input of the Setup Application parameters
service password Fn key function
Device parameters („Device parameters“ menu structure depicted below)
Info
Language
Factory settings: all parameters
Setup Device WP1 Off
(Device parameters)
Enter the service RS-232
1
) SBI Standard
password for access
SBI Verifiable
o IS-232 (see „WP1 - Internal“ menu
2
). Rather than A/D converter configuration,
the variant is selected here („Variant“).
ADC-232 (see „WP1 - Internal“ menu
2
)).
Internal A/D converter (see „WP1 - Internal - A/D converter configuration“ on the page after next).
configuration
Calibration/ CAL key function o Ext. cal./adjust.; factory-defined weight
Adjustment Ext. cal./adjust.; user-defined weight
Ext. lineariz.; factory-def. wt.2)
Ext. lineariz.; user-defined weight
Set preload
Clear preload
Cal key blocked
Cal./adj. sequence Cal. then auto adjust
o Cal. then manual adjust
1
) function will be made available in future
2
) availability of menu items depends on the software and on the functionality of the connected weighing platform
3
) menu item not available on scales verified for use in legal metrology