Example:
Calculating the weight per unit area of paper: An A4 sheet of paper is used in this example,
with surface dimensions of 0.210 m + 0.297 m = 0.06237 m
2
. To determine the weight per
unit area, the total weight is divided by the surface.
Parameter settings:
Applic.: Calc..: Method: Div. (menu code 2. 8. 1. 2)
Step Key (or instruction) Display/Data output
1. Tare the balance/scale
w 0.00 g
2. Activate divisor input
b ______0.
3. Set the divisor (in this example:0.06237):
Position the decimal point,
u, 5x b, __.00000
2+ u,
Enter numerals Repeatedly
__.06000
or press and hold;
b, u, etc. __.06237
4. Store the divisor and
initialize the balance/scale
u + 0.0
o
The current divisor remains Div 0.6237
stored in battery-backed memory
until the setting is changed
5. Weight per unit area: +
79.7
o
*
Place an A4 sheet of paper
on the balance/scale
6. If desired, print result
r Res + 79.7 o
7. Toggle display between Repeatedly: b + 4.97 g
*
weight and calculated value + 79.7
o
*
8. Unload the balance/scale + 0.0
o
*
9. Repeat as needed, starting from Step 5
31
To Next Page
Loading...
Need help?
General