Animal Weighing/Averaging
Display symbol: V
Purpose
Use this program to determine the weights
of unstable samples (e.g., live animals) or
to determine weights under unstable ambi-
ent conditions. With this program, the bal-
ance/scale calculates the weight as the
average of a defined number of individual
weighing operations (also referred to as
“subweighing operations”).
Changing the Number of Subweighing
Operations
Activate function:
Press the b key
Select the desired number of measurement
(1 to 100):
In increments of 1: Press the b key
briefly
In increments of 10: Press and hold the
b key.
The selected number of measurements is
stored in battery-backed memory.
Preparation
§ Select the Animal weighing application
in the menu:
see “Configuration.”
§ Set the following parameters:
Applic. Application program
AnimalW.Animal weighing
activty. Animal activity
Calm Stable readout
o Active Unstable
V.Active Very unstable readout
Start
manual
o Autom. Automatic
o = Factory setting
Printout: Animal weighing
mDef 20 : Number of sub-
weighing operations
x-Net + 410.1 g : Calculated average
32
To Next Page
Loading...
Need help?
General