Example: Counting parts into a container
Parameter settings:
Applic.: Net-Tot (menu code 2. 5.)
Step Key (or instruction) Display/Data output
1. Place empty container
on the balance/scale.
65.0 g
2. Tare the balance/scale
w 0.0 g
3. Add first component +
120.5 g
4. Store component data
u + 0.0 g
*
NET
Comp 1+ 120.5 g
5. Add next component + 70.5 g
*
NET
6. Store component data u + 0.0 g
*
NET
Comp 2+ 70.5 g
7. Weigh in further components Repeat steps
as desired 5 and 6
8. Fill to desired final value view
b + 191.0 g
*
the current total weight value:
9. Print total weight and clear
c + 2117.5 g
the component memory
T-Comp+ 2117.5 g
35
To Next Page
Loading...
Need help?
General