Connecting the Balance/Scale to AC Power/
Safety Precautions
Use only genuine Sartorius AC adapters. For use
within Europe: part no. 6971948
§ Connect the angle plug to the balance/scale
§ Connect the AC adapter to the wall outlet (mains)
AC Adapter with Country-specific Power Cord
Some models come with separate country-specific
power cords for the AC adapter. In Europe, use only
genuine Sartorius AC adapter part no. 6971982.
§ Connect the angle plug to the balance/scale
§ Select the power cord for your area and connect it
to the AC adapter
§ Plug the power cord into the wall outlet (mains)
The ground terminal is connected to the
balance/scale housing, which can be additionally
grounded for operation.
Set the required voltage, if necessary.
If you need to set the voltage, use one of the
following genuine Sartorius adapters:
– TNG8 adapter, part no. 6971951 (universal)
or
– TNG8 adapter, part no. 6971952 (for the UK)
§ Move the switch to set the voltage to 230 V or 115 V
7
To Next Page
Loading...
Need help?
General