Sartorius IW2P1x-60FE-L - Detailed Setup Menu Options

Miras 2
Miras 2
17
17
Setup Menu 1. Serial COM 1.1 Baud rate 1.1.1 600
1.1.2 1,200
1.1.3 2,400
1.1.4 4,800
1.1.5 9,600 •
1.1.6 19,200
1.2 Parity 1.2.1 7-bit-None
1.2.2 7-bit-Odd
1.2.3 7-bit-Even •
1.2.4 8-bit-None
1.2.5 8-bit-Odd
1.2.6 8-bit-Even
1.3 Print option 1.3.1 Short •
1.3.2 Long/block
1.3.3 Continuous
2. Backlight 2.1 On •
2.2 Off
3. Auto Power Off 3.1 No options •
3.2 5 Min.
3.3 10 Min.
3.4 15 Min.
4. Standby Options 4.1 On •
4.2 Off
5. Adapter Filter 5.1 Very stable conditions
5.2 Stable conditions •
5.3 Unstable conditions
5.4 Very unstable conditions
6. ADC Configuration 6.1 Decimal point 6.1.1 0
6.1.2 1
6.1.3 2
6.1.4 3
6.1.5 4
6.2 Basic unit 6.2.1 g
6.2.2 kg
6.2.3 lb • For some countries,
6.2.4 oz these units
6.2.5 t are disabled
6.3 Step width 6.3.1 1
6.3.2 2
6.3.3 5
6.4 e<>d frame 6.4.1 On
6.4.2 Off •
6.5 Adjust FSD (span) 6.5.1 (Enter FSD weight)
6.6 Calibration weight 6.6.1 (Enter CAL weight)
6.7 Linearisation weight 6.7.1 (Enter Lin weight)
6.8 Calibration unit 6.8.1 g
6.8.2 kg •
6.8.3 lb
7. Reset Menu 7.1 Do not restore
7.2 Restore
• = Factory setting