a. Print Output: Expansion of Abbreviations
N Net weight
G Gross weight
T Tare weight (appears in block printing mode, if tare is not zero)
Chk. Checkweighing status (If checkweighing application is selected)
OK Ok (checkweighing mode, if the placed weight is in the range set)
HI High
LO Low
LL Lower limit (checkweighing)
HL Higher limit (checkweighing)
W.Ref. Reference weight (counting application)
Pcs Number of units on the pan
g Weight in grams
kg Weight in kilograms
+ Appears if the value is greater than or equal to zero
– Appears if the value is less than zero
28
To Next Page
Loading...
