16
Configuring the Balance
Setting the Parameters (Menu Codes)
You can configure your balance to meet individual requirements by selecting from
the parameters available in the menu.
Example: Adapt the balance to unstable ambient conditions
Menu code 1. 1. 4
Step Key (or instruction) Display
1. Turn off the balance e
2. Turn the balance back on; e
while all segments
are displayed t briefly
1.
$ To navigate within a menu t repeatedly 2.
level; the last menu option is
followed by the first option
9.
1.
3. Select the 2nd menu level p 1. 1.
4. Select the 3rd menu level p 1. 1. 2 o
5. In Menu Level 3:
Select the desired option t repeatedly
1. 1. 4
6. Confirm new setting;
the “o” indicates the currently
set option p >2 sec.
1. 1. 4 o
$ Select the next menu level (here:
move from the 3rd to the 1st level) p
1.
$ Set other menu codes, if desired p, t
7. Store parameter settings t >2 sec.
and exit operating menu
or
$ Exit operating menu
without storing changes e
> Restart the application
0.0 g
·
·
·
To Next Page
Loading...
Need help?
General