Operation
Overview of Display and Operating Elements
8
Position Designation
1 Weight units
2 Calculated-value indicator
(i.e., not a weight value)
3 Taring
4 Symbol: “Printing mode active”
5 Symbol: Gross or net value
6 Data output:
Press this key to send readout
values to the built-in data
interface.
7 Start an application program
Position Designation
8 Delete (Clear Function)
This key is generally used to
cancel functions:
– Quit application program
– Cancel calibration/adjustment
routine | Exit the operating
menu
9 On/off
10 Symbols for zero range
(verified models only)
11 Weight value displayed
in selected weight unit
To Next Page
Loading...
