9
Basic Weighing Function
Preparation
Turn on the balance: Press e
To change configurations: See the chapter entitled “Configuring the Balance”
$ To tare the balance: Press t
Additional Functions:
To turn off the balance: Press e
Warmup Time
To ensure accurate results, the balance must warm up for 30 minutes
before operaion. Only after this time will the balance have reached
the required operating temperature.
Example
Basic weighing
Step Key (or instruction) Display/Printout
1. Turn on the balance e
Self-test is performed
2. Place container on balance
+ 52.0 g
(here: 52 g)
3. Tare the balance t
+ 0.0 g
4. Place sample in container
+ 150.2 g
on balance (here: 150.2 g)
To Next Page
Loading...
Need help?
General