Sartorius MA35 - Configuration; Setting the Device Parameters

21
Configuration
Setting the Device Parameters
o Factory setting
Setup 5. Interface 5.1 Baud rate 5.1.3 600 baud
Device 5.1.4 o 1200 baud
parameters 5.1.5 2400 baud
5.1.6 4800 baud
5.1.7 9600 baud
5.1.8 19,200 baud
5.2 Parity 5.2.3 o Odd
5.2.4 Even
5.2.5 None
5.3 Number of 5.3.1 o 1 stop bit
stop bits 5.3.2 2 stop bits
5.4 Handshake 5.4.1 Software
mode 5.4.2 o Hardware
5.4.3 None
5.5 Number of 5.5.1 o 7 bits
data bits 5.5.2 8 bits
6. Printing 6.7 Printout 6.7.1 Result only
6.7.2 o Complete (with GLP
and drying
parameters)
6.9 Language 6.9.1 German
6.9.2 o English
6.9.3 US English
(US date/time format)
6.9.4 French
6.9.5 Italian
6.9.6 Spanish
6.9.8 Russian CP1251
6.9.9 Russian CP866
9. Reset menu 9.1 Factory 9.1.1
Reset to factory settings
settings 9.1.2 o Do not reset