107
Purpose
With this function, you can assign
IDs to values for documentation and
printouts.
You can use this function in combina-
tion with any program from Application
1 (such as counting, weighing in per-
cent), one from Application 2 (check-
weighing, time-controlled functions)
and one from Application 3 (totalizing,
formulation, statistics) as well as with
the other extra functions.
Features
– Store up to 4 IDs; these can be stored,
changed or deleted individually.
– Each ID consists of a name and
a value; both can be defined by the
user.
– ID designations are configured as fol-
lows: Setup: Printout: Identification
codes
– Each ID code can have up to 20
characters; when you enter the value
later, however, no more than 15
characters of this ID are displayed.
– The ID values are entered while the
application program is active; press the
ID soft key to toggle to the ID input
mode.
– Each ID value can have up to
20 characters.
– Access 1 of the 4 IDs directly using the
numeric keys. The other three can only
be accessed by pressing the
ID soft key
to toggle to the ID input mode.
– You can assign this function to the
fourth or fifth soft key (from the right);
i.e., F4 or F5.
– You can configure when the ID will be
included on the printout (see “Prepara-
tion” on the next page).
– You can configure the position of IDs
on the individual or total printout.
– The ID code is printed flush left; the
value flush right. If the name and value
together are too long for one line, the
data is printed on two lines.
– Optional configuration in the Setup
menu to delete a single character when
entering an identification code by
pressing c. Setup: Device
parameters: Keys: CF function for
input: Delete last character
– Press the
Delete soft key to delete
an ID
Factory Settings of the ID Names
ID1:
ID1
ID2: ID2
ID3: ID3
ID4: ID4
Factory Settings for ID Codes
No values set
Factory Settings of the Parameters
Printout:
Each time the print key
is pressed
Soft Key Functions
ID Toggle to “Identification
codes” menu
Delete Delete input of selected ID
Printout of ID Codes
Up to 4 (stored) identification codes are
printed out.
ID1 Lot no. 1234
ID2 Daimler/Chrysler
ID3 Screws M4x6
ID4 Jack Smith
ID1: Identification 1 (ID 1)
ID2: Identification 2 (ID 2)
ID3: Identification 3 (ID 3)
ID4: Identification 4 (ID 4)
Individual Identification Codes (ID)
To Next Page
Loading...
Need help?
General
