Genius is a high-resolution balance of
special accuracy for extremely precise
measurement of mass. The Genius
series covers a range between 0.001 mg
and 610 g.
A broad range of special performance
features makes the Genius balances
ideal for use as measuring and test
equipment in ISO or GLP quality man-
agement systems.
These features include:
– The fully automatic self-calibrating
and adjustment function, isoCAL
(time- and temperature-dependent)
– reproTEST for quick determination of
the standard deviation to check the
repeatability of results
– ISO/GLP-compliant recording capability
for printouts
– Password-protected menu lock
– Display of maintenance |
service intervals when due
Genius balances meet the highest
requirements placed on the accuracy
and reliability of weighing results
through the following features:
– Efficient filtering-out of vibration
– Fully automatic draft shield with three
motorized, self-teaching draft shield
elements and soft-touch technology,
known as F.A.S.T.
– Stable and repeatable results
– Excellent readability under any
lighting conditions
– Rugged design and durable weighing
system
ME215/235/254/414/415/614:
– Integrated N.I.C.E. static electricity
eliminator feature to neutralize
interfering electrostatic charges (ionizer)
Genius balances save work and speed
up both simple and complex routine
applications through:
– Ultrafast response times
Built-in application programs;
application level 1:
– Second weight unit
– Counting
– Weighing in percent
– Animal weighing
– Recalculation
– Calculation
– Density determination
– Differential weighing
– Air buoyancy correction
– Air density determination
for ME5, SE2
Application level 2:
– Checkweighing
– Time-controlled functions
Application level 3:
– Totalizing
– Formulation
– Statistics
with the following additional functions:
– Second tare memory
– Identification codes
– Product data memory
– SQmin function
– Manual data storage in
application level 3
– DKD uncertainty of measurement
– Automatic initialization when you
switch on the balance
– Easy input of IDs for
samples or other weighed objects
– If requested: control using an
external computer
Symbols
The following symbols are used in these
instructions:
● indicates steps you must perform
$ indicates steps you must perform only
under certain conditions
> describes what happens after you have
performed a certain step
– indicates an item in a list
! indicates a hazard
Conventions Used in These Operating
Instructions:
– The pictures in these Operating Instruc-
tions are based on the ME215S model.
On other models, some display readouts
and printouts may differ slightly from
the ones shown. This will be explained
in cases where this is important for
operation of the balance.
For technical advice on applications:
Phone (in Germany):
+49.(0)551.308.3795
Fax (in Germany):
+49.(0)551.308.3495
2
Intended Use
To Next Page
Loading...
Need help?
General
