Antitheft Locking Device
To fasten an antitheft locking device, use the lug located on the rear panel
of the balance.
§ Secure the balance at the place of installation, e.g., with a chain
or a lock
Leveling the Balance
Purpose:
– To compensate for unevenness at the place of installation
– To achieve perfectly horizontal positioning of the balance for consistent repeatability
of the weighing results
Always level the balance again any time it has been moved.
Only the 2 front feet are used for leveling.
§ Turn the leveling feet as shown in the diagram until the air bubble is centered exactly
within the circle of the level indicator
> Several leveling steps are usually required
Setting the Language
> See the section on “Setting the Language” in the chapter “Configuring the Balance”
Setting the Date and Time
> See the example on page 17, in the chapter “Configuring the Balance”
14
ME215/235/254/414/415/614:
MES, SE2:
To Next Page
Loading...
Need help?
General
