Sartorius ME5-F User Manual

Purpose
This menu item enables you to have
information displayed about the specific
balance (“device”).
Display Device Information on
ME215/235/254/414/415/614
§ Select the Setup menu:
press the s key
> “SETUP” is displayed:
§ Select “Info”:
Repeatedly press the
q soft key, then
press the
O soft key
§ Select “Device information”:
press the
O soft key
> Device information is displayed:
Display Device Information
on ME5 or SE2
§ Select “Device Information”:
Press the j key
> Device information is displayed
oo o q
SETUP INFO
Version no: 01-41-05
Wgh.sys. ver. #: 00-21-09
Draft sh. ver.#: 05-01-03
Model: ME215S
Serial no: 91205355
§ Print device information:
Press the p/r key
> Printout (Example)
--------------------
23.12.2001 13:02
Model ME215S
Ser. no. 91205355
Ver. no. 01-41-05
(Version of the operating program)
ID BECKER123
(User ID)
--------------------
L ID LOT 23
(Lot ID)
SETUP
INFO
--------------------
Version no.:
01-41-05
(Version of the operating program)
Wgh. sys. ver. #:
00-21-09
(Version no. of the weighing cell)
Dft. shield v. no.:
05-01-03
(Program version no. of the
draft shield)
Model:
ME215S
Serial no.:
91205355
Next mainten.:
01.01.2003
Service phone:
00495513080
SQmin:
0.0300 g
--------------------
§ Return to SETUP overview:
press the
o soft key
§ Exit Setup menu:
Press the
oo soft key
> Original settings are restored
Factory Settings
Each parameter category has a factory
setting. In the Setup menu, you can
restore all factory settings by confirming
the selection
YES.
The following settings are not restored:
– Language
– Password
– Display contrast
– Time (clock)
38
Device Information

Sartorius ME5-F Specifications

General

Brand	Sartorius
Model	ME5-F
Category	Scales
Language	English