Sartorius Signum 1 Operating Instruction

With the Totalizing application,
you can add weight values together
in the totalizing memory. In addition
to weight values, the quantity of
individual values added to memory is
also saved (transaction counter).
Features
– Totalize up to 999 individual weights
Save values automatically:
– Save both net values and calculated
values (if available). Configure in
the operating menu, under:
Appl 3:
totaliz: 3.16.
– Save weight values and calculated
values from either Application 1
(for example, Counting, Weighing
in Percent) or Application 2 (Check-
weighing). Operating menu setting:
Appl 3:
totaliz: 3.22.
– Current transaction number displayed
in the text line (indicating the items
already added)
– Weighing in up to a defined target,
with the totalization memory content
+ current weight displayed in the
text line.
– Save weight values manually or
automatically
– Accurate calculation of total of weight
values from two weighing platforms
– Activate info-mode by pressing I
– Automatic printout when value saved
– Automatic taring of container weight.
Operating menu setting:
Appl: a.tare: 3.7.
– Incomplete totalizing routines
saved in battery-backed memory.
Operating menu setting:
Appl: a.start: 3.8.
– Closing application program;
deleting parameters:
You can select the function of the
c key for clearing application data.
When an application is active, this key
can either delete the values saved
for all applications, or delete selected
values saved for the active application.
Operating menu setting:
Appl: sel.cf: 3.24.
(select CF key function in applications)
– Tare function:
1) If you store a tare (weight value) by
pressing the ) key, you can later
enter a tare value manually. The tare
value you enter is added to the stored
tare value.
Setting: menu code 3.25.1 (factory
default)
2) A tare value entered manually over-
writes a stored tare value (weight
value). If you enter a tare value manu-
ally, a tare value (weight value) stored
later overwrites the manually entered
value.
Setting: menu code 3.25.2
Operating menu setting:
Signum 2
Appl :
L : 3.25.
Signum 3
Appl : tare. f : 3.25.
– Restore factory default settings. Operat-
ing menu setting:
Signum 2:
Appl :
L : 9.1.
Signum 3:
Appl
: DEF.App : 9.1.
The Signum has a totalizing memory
for adding individual net and gross
values. You can save weight values in
totalizing memory manually or auto-
matically. Configure in Setup under:
Appl 3:
totaliz: 3.16.
– Add a weight value manually by
pressing O
The net value from the active platform
is added to the value already saved
in totalization memory and the transac-
tion counter value is increased by one.
When a value is added manually,
the program does not check whether
the platform has been unloaded since
the last time the O key was pressed.
– Value saved automatically when
the weighing platform is stable and the
defined minimum load is exceeded.
If the defined minimum load is not
exceeded, you can save the item manu-
ally by pressing the O key.
Regardless of these settings, the current
value cannot be saved automatically
unless the platform had been unloaded
before the current sample was placed
on it. The weighing platform is con-
sidered to be unloaded when the load
less than 50% of the minimum load.
The number of items added to memory
is displayed in the text line.
Press the c key to clear the totalizing
memory. A printout is automatically
generated.
With the weighing platforms connected,
you can add values from both platforms
to the totalizing memory.
The displayed result is accurately
calculated in the active weight unit.
Example: When you add 1243 g
(determined on a weighing platform
with three decimal places) to 1400 g
(determined on a platform with
1 decimal place) the display shows
2.643 g.
Application 3: Totalizing L
71

Sartorius Signum 1 Specifications

General

Brand	Sartorius
Model	Signum 1
Category	Scales
Language	English