Sartorius SIWRDCP - Protecting Setup with a User Password

17
Configuring a Password
Example:
Assign a password (in this example,
AB2) to protect the application program settings APPL
and the device parameters SETUP from unauthorized changes
e
1 Switch on the Signum
)
2 While all segments are lit,
press )
The first item in the main
menu is shown:
APPL
k
3 Select the SETUP menu
item (press k repeatedly
until
SETUP is displayed)
)
4 Open the SETUP menu
k
5 Select the PASSWORD menu
item (press k repeatedly
until
PASSWORD is displayed)
)
6 Open the PASSWORD menu
p
,
p
7 Enter the first character
using the p and k keys
(in this example:
a symbol
is shown on the readout)
)
8 Save the character
p
,
p
,
p
9 Enter the second character
using the p and k keys
(in this example:
B)
)
10 Save the character
k
,
k
,
k
, 11 Enter the third character
using the p and k keys
(in this example:
2)
)
12 Save the password
(
13 Exit this menu level
to configure other menu
settings, or
)
14 Exit the operating menu
(press and hold the ) key)
To delete a password:
Overwrite the old password
with the new password, or enter
a space as the password and
press ) to confirm