With the Net-total Formulation
application, you can weigh in different
components up to a defined total.
Each component is saved in a net-total
memory.
Features
– Weigh in up to 999 components
in series
– Net-total formulation cannot
be combined with a level 1 or level
2 application
– Current component number displayed
in the text line (indicating the compo-
nent to be added)
– Toggle the display between
“component mode” and “additive
mode” by pressing w.
– Component mode: Display the
weight of the component currently
on the platform (for 1 second
after it is saved; then the platform
is tared)
– Additive mode: Display the weight
of all components on the platform
(after it is saved, the net weight
of the last component added is dis-
played briefly)
– Toggle to a second weighing
instrument while weighing on the first
– Activate info-mode by pressing I
– Automatic printout each of
component as it is saved. Configure
in the operating menu, under:
Appl 3:
Net Tot: 3.17.
If menu item 3.17.2 is set, the entire
component printout is generated every
time a component is saved. If menu
item
3.17.3 is set, the full printout
is generated only once, for the first
component:
Blank line, date, time, ID1 through ID4,
header lines 1 and 2. For subsequent
components, each “component” item
(“Comp xx”) is followed by a blank line.
– Automatic taring of container weight.
Operating menu setting:
Appl: a.tare: 3.7.
– Restore factory default settings.
Operating menu setting:
Signum 2:
Appl : R : 9.1.
Signum 3:
Appl : DEF.App : 9.1.
Application 3: Net-total Formulation R
74
To Next Page
Loading...
