34
Shipping | Disposal
Shipping
Returning the Device and Parts
Defective devices or parts can be sent back to Sartorius. Returned devices must be clean, decontaminated, and properly packed. Trans-
port damage as well as measures for subsequent cleaning and disinfection of the device or parts by Sartorius shall be charged to sender.
§ Decommission the device.
§ Contact Sartorius Service for instructions on how to return devices or parts (please refer to www.sartorius.com).
§ Pack the device and its parts properly for return.
Disposal
Information on Decontamination
The device does not contain any hazardous materials that would necessitate special disposal measures. Contaminated samples used
during the process that could cause biological or chemical hazards are potentially hazardous materials.
If the device has come into contact with hazardous substances: Steps must be taken to ensure proper decontamination and declara-
tion. The operator is responsible for adhering to local government regulations on the proper declaration for transport and disposal and
the proper disposal of the device.
Disassembly
§ Remove the weigh cell from the system.
Disposing of the Device and Parts
The device and the device accessories must be disposed of properly by disposal facilities. The packaging is made of environmentally
friendly materials that can be used as secondary raw materials.
§ Dispose of the device. Follow the disposal instructions on our website (www.sartorius.com).
§ Dispose of the packaging in accordance with local government regulations.
To Next Page
Loading...
Need help?
General
