§ To store the setting, press the key
> The two “minutes” digits flash (see example on the left)
§ To set the minutes, press the key or key,
repeatedly if necessary
> The “minutes” digits are adjusted (see example on the
left)
§ To store the setting, press the key
> The display returns to the previous status
§ To set the date, press the key
> The display is as shown on the left; “dd” stands for
“day”
§ To select the desired day, press the key
§ Enter the day and month in the same manner as the
hours and minutes
§ To set the year, press the key
> The display is as shown on the left; “YY” stands for
“year”
§ Enter the year (the last two digits) in the same
manner as the minutes:
80 to 99 for 1980 to 1999
00 to 79 for 2000 to 2079
§ To exit the date/time setting mode, press the key,
and then press .
> Press
22
To Next Page
Loading...
Need help?
General
