Safety Instructions
The data printer complies with the EC
Directives and Standards for electrical
equipment and electromagnetic
compatibility.
Use only size AA nickel-metal hydride
rechargeable batteries, order no.
69Y03136.
Avoid draining the batteries excessively,
as this will reduce their recharging
capacity.
Used batteries are hazardous waste
and must be properly disposed of in
accordance with your local hazardous
waste disposal regulations.
If you need to use an external power
supply, use only an original Sartorius AC
adapter (see “Accessories”). The external
power supply is required only if the
printer is operated in conjunction with
equipment that do not provide suffi-
cient voltage for the YDP20-0CE.
Please contact your Sartorius dealer
if you require an external power supply.
Use only a slightly moistened cloth
to clean the equipment, and make sure
that no liquid enters the printer
housing.
Caution: The serrated edge for tearing
off printouts is sharp; direct contact can
result in injury.
§ Deactivate the ISO/GLP-compliant
printout function for the following
instruments:
– Economy/Express Series, EA/EB scales
(up to serial numbers 912xxxxx from
December 1999)
– GT/PT/QS/QT/XQ balances and scales
(with MP 10 processors)
– QS/TS scales (with MP 12 processors)
– MA model moisture analyzers
$ To change this setting, refer to the
section entitled “Settings for ISO/GLP-
compliant Data Records”.
5
To Next Page
Loading...
Need help?
General
