C Marking
The equipment complies with the following EC Directives and European Standards:
Council Directive 2004/108/EEC: “Electromagnetic compatibility (EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product standard EN 61326-1 Class B (residential area)
Defined immunity to interference:
in accordance with product standard EN 61326-1
(Industrial environment)
Note:
The operator shall be responsible for any modifications to Sartorius equipment and for
connections of cables not supplied by Sartorius and must check and, if necessary, correct
these modifications.
On request, Sartorius will provide information on the minimum operating specifications
(in accordance with the Standards listed above for defined immunity to interference).
2006/95/EC: “Electrical equipment designed for use within certain voltage limits”
Applicable European Standards:
EN61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use
Part 1: General requirements
If you use electrical equipment in installations and under ambient conditions subject
to stricter safety standards than those described in the manual, you must comply with the
provisions as specified in the applicable regulations for installation in your country.
Limitation of emissions:
EN 50081-1 Residential, commercial and light industry
EN 50081-2 Industrial environment
Defined immunity to interference:
EN 50082-1 Residential, commercial and light industry
EN 50082-2 Industrial environment
Important Note:
The operator shall be responsible for any modifications to Sartorius equipment and for
any connections of cables or equipment not supplied by Sartorius and must check and,
if necessary, correct these modifications and connections. On request, Sartorius will
provide information on the minimum operating specifications (in accordance with the
Standards listed above for defined immunity to interference).
38
To Next Page
Loading...
Need help?
General
