Sartorius YDP20-0CE - Printer Port Options

Options for Printer Port Settings
Designation Display Factory Options
settings
Password code 0100 to 9999
Transmission rate baud 1,200 1,200, 2,400, 4,800, 9,600,
(Baud rate) 19,200
Number of data bits: data 7 7 data bits
8 data bit
Parity Pary Odd Odd
Even
0 = Space
1 = Mark
RS-232C handshake HAnd 0 0 = Hardware = DTR/CTS
DTR/CTS 1 = Software = XON/XOFF
Print with <CR, LF> -P1- 1 0 = OFF = no
(print without CR/LF)
(send CR/LF) on 1 = on = yes (print with CR/LF)
Print right or left justified -P2- 0 0 = Right justified
(print format) Right 1 = Left justified
Print period or comma -P3- 0 0 = Period (decimal point)
(decimal separator) Period 1 = Comma
Numerator on/off -P4- 1 0 = OFF = Print without numerator
(numbering function) ON 1 = ON = Print with numerator
Inverse printing -P5- 0 0 = No inverse printing,
1 = Last digit inverse,
2 = Last 2 digits inverse,
3 = Last 3 digits inverse
Manual/automatic storage -P6- 0 0 = Standard = Values stored
of measured values Standard individually
1 = Values stored automatically
Date/time when printer starts -P7- 1 0 = OFF = Not printed
(date/time printout) on 1 = ON = Date and time printed
Print VARTEXT1 on startup -P8- 0 0 = OFF = VARTEXT1 not printed
OFF 1 = ON = VARTEXT1 printed
Print VARTEXT2 on startup -P9- 0 0 = OFF = VARTEXT2 not printed
OFF 1 = ON = VARTEXT2 printed
Time display format -C1- 24 12 or 24 hours
Date/time display -C2- 0 0 = Time
(display) Time 1 = Date
26