higher or lower. Your thermostat can be accurately calibrated to match your
previous thermostat. The current or adjusted room temperature will be
displayed on the display.
8. Select compressor lockout delay
To protect the compressor from short cycling, you can select compressor
off-time cycle between 0 or 5 minutes. When the thermostat compressor time
delay occurs, the Cool On or Heat On display will flash during compressor
lockout.
9. Intelligent recovery
When selected (1), The thermostat will calculate how long it takes to
bring the room temperature up to the programmed set-point on the first
set-up period of the day, and activate the system earlier so that the
To Next Page
Loading...
