counting the days until the next filter change.
MANUAL OPERATION
1) Hold Temperature
With the SYSTEM switch set to HEAT or COOL, momentarily press the
HOLD button. HOLD will be displayed. Use the ▲ or ▼ buttons to
adjust the temperature. The thermostat will control the room temperature
at the selected setting until you press the RUN button to restart the program
operation.
2) Temperature Override (When in the program RUN mode).
Press the ▲ and ▼ buttons to select the desired room temperature.
The thermostat will override the current programming and keep the
Room temperature at the selected temperature until the next program
period begins. The thermostat will then revert back to the program
To Next Page
Loading...
Need help?
General
