(flashing),and the currently programmed temperature.
9) Repeat steps 3 thru 7 to complete Saturday and Sunday programming.
10) When you have completed entering your heating program, press RUN.
Enter the Cooling Program
Caution! If the outside temperature is below 50ºF; disconnect power to
the cooling system before programming. Energizing the air conditioner
compressor during cold weather may cause property damage.
1) Move the SYSTEM switch to the COOL position.
2) Follow “Enter the Heating Program” for entering your cooling program,
using your selected cooling times and temperatures.
Check your programming
Follow these steps to check your thermostat programming one final time
To Next Page
Loading...
