room temperature is at set-point at the set-up time.
THERMOSTAT OPERATION
1. Setting the thermostat
This thermostat is very easy to operate. Set the SYSTEM switch to
either HEAT or COOL, then press the ▲ or ▼ buttons until the temperature you
want to maintain is shown on the right side of the
display. If you want to turn the system off, just move the SYSTEM switch to the
OFF position and the FAN switch to the AUTO position.
2. Set current day and time
Press the TIME button. The hours display will begin to blink.
Press the ▲ or ▼ buttons until you reach the correct hour and AM/PM
designation. (AM begins at mid-night, and PM begins at noon).
To Next Page
Loading...
