Saswell SAS900STK-2 - Important Safety Information; Electrical Shock Hazard

3

Intelligent Recovery Option for optimizing comfort
IMPORTANT SAFETY INFORMATION-------------------------------------------

Always turn off power at the main power source by removing the fuse, or
switching the circuit breaker to the off position before installing, removing,
cleaning, or servicing this thermostat.

Read all of the information in this manual before installing this thermostat.

Use a professional contractor to install this thermostat.

This is a 24VAC low-voltage thermostat. DO NOT INSTALL ON VOLTAGES
HIGHER THAN 30 VAC.

ALL wiring must conform to local and national building and electrical codes
and ordinances.

Do not short (jumper) across terminals on the gas valve or at the system