3) Press the ▲ and ▼ buttons to select the desired 1
st
heating period start
time. The time will change in 15 minute increments. When your selected time
is displayed, press the TIME button to change to the temperature mode.
4) Press the ▲ and ▼ buttons to select the desired 1
st
heating period
temperature.
5) Press PRGM once. The currently programmed start time and set point for
the 2
nd
heating program will appear.
6) Repeat steps 3 and 4 to select the start time and heating temperature for
the 2
nd
heating program period.
7) Repeat steps 3 thru 5 for the 3
rd
and 4
th
heating program periods.
8) Press PRGM once. PRGM SETTING will display, and “SAT SUN”
indicating weekday program) will appear in the display (flashing). Also
displayed are the current programmed start time for the 1
st
heating period
To Next Page
Loading...
Need help?
General
