Satel INTEGRA 64 Plus - INT-KLCDK Keypad; INT-KLFR Keypad; 8 Manual Update History

30 Installer Manual SATEL
Enclosure dimensions ................................................................................ 114 x 94 x 23.5 mm
Weight...............................................................................................................................141 g
7.6 INT-KLCDK keypad
Supply voltage ................................................................................................... 12 V DC ±15%
Standby current consumption ..........................................................................................30 mA
Maximum current consumption ......................................................................................110 mA
Environmental class according to EN50130-5 .........................................................................II
Operating temperature range................................................................................. -10…+55 °C
Maximum humidity ..........................................................................................................93±3%
Enclosure dimensions ................................................................................. 160 x 132 x 29 mm
Weight...............................................................................................................................317 g
7.7 INT-KLFR keypad
Supply voltage ................................................................................................... 12 V DC ±15%
Standby current consumption ..........................................................................................60 mA
Maximum current consumption ......................................................................................110 mA
Environmental class according to EN50130-5 .........................................................................II
Operating temperature range................................................................................. -10…+55 °C
Maximum humidity ..........................................................................................................93±3%
Enclosure dimensions ................................................................................. 145 x 143 x 25 mm
Weight...............................................................................................................................346 g
8. Manual update history
Date
Firmware
version
Introduced changes
2013-08 1.12
 Information on INTEGRA 256 Plus control panel has been added.
 Information on the capability to report events via Ethernet using the UDP
protocol has been added (p. 4).
 Information on the event log in INTEGRA 64 Plus control panel has been
corrected (p. 4 and p. 28).
 Information on the new INT-TSG keypad has been added (p. 5).
 Note about INTEGRA 256 Plus control panel and INT-KSG keypad has been
added (p. 6).
 Information on the new INT-AV module has been added (pp. 9, 12 and 17).
 Note on clock / RAM backup battery has been modified (p. 12).
 Note to recommend restoration of factory settings after control panel first
start-up has been added (p. 21).
 Information on ACU-250 and INT-RX-S modules has been added.
2013-12 1.12
 Information on the capability to report events by means of GPRS using the
UDP protocol has been added (p. 4).
 Information on the INT-TSI keypad has been added (p. 5).
 Information on the INT-KLFR keypad has been added (p. 5 and 30).
 Information on the INT-RS Plus module has been added (p. 6).
 Note about INTEGRA 256 Plus control panel and INT-RS Plus module has
been added (s. 6).