4 Installer Manual SATEL
Two expander buses for connecting up to 64 devices (32 devices to each bus).
Communication
Telephone dialer (communicator) to allow:
– events reporting;
– event messaging;
– checking the alarm system status by telephone (DTMF);
– remote control of the alarm system outputs by telephone (DTMF).
Built-in 300 bps modem to allow remote operation and programming of the alarm system.
Reporting events to two monitoring stations:
– several communication formats (including Contact ID and SIA);
– 4 telephone numbers (2 main + 2 backup ones);
– 9 identifiers.
Alternative ways to report events available after additional modules are connected:
– Ethernet (TCP or UDP);
– GPRS (TCP or UDP),
– GSM voice channel.
Event messaging to 32 phone numbers in the form of:
– voice messages played back by an additional module (INT-VG, CA-64 SM or SM-2);
– text messages defined by the installer;
– SMS messages with content related to the event description in the event log (after
connecting the GSM module, manufactured by SATEL).
Event log
5631 (INTEGRA 64 Plus), 22527 (INTEGRA 128 Plus) or 24575 (INTEGRA 256 Plus)
events.
A separate memory space to store events required by the EN 50131 standard for Grade 3.
Event log printing capability.
Users
8 master users (administrators).
192 (INTEGRA 64 Plus) or 240 (INTEGRA 128 Plus and INTEGRA 256 Plus) users.
Capability to assign to the user:
– a code,
– a proximity card (125 kHz passive transponder, which may be in the form of a card, tag,
etc.),
– DALLAS iButton (chip)
– keyfob.
Several user types.
Authority level determining the scope of access to the system.
Additional features
Access control functions realized by means of additional modules.
64 system timers programmed by the installer to automatically:
– arm/disarm the partitions;
– control the outputs (switching the lights on/off, watering the garden, etc.).
Partition timers, programmed by the installer or the users (1 for each partition), to allow
automatic arming/disarming.
To Next Page
