Satel Integra Plus Series - Page 22

20 Programming SATEL
Filter
[select zone to which wireless device is assigned]
Remove device
[select zone to which wireless device is assigned]
Synchronization
Test mode on
Test mode off
CA-64 E / CA-64 O / INT-ORS / INT-IORS / CA-64 SM
No autorst.3t.
Tamper in part.
CA-64 Ei (v. 2.00/2.01)
No autorst.3t.
Tamper in part.
EOL Rp resistor
CA-64 Ei (v. 4.00)
No autorst.3t.
Tamper in part.
EOL R1 resistor
EOL R2 resistor
CA-64 EPS / CA-64 ADR / CA-64 OPS / CA-64 PP
No autorst.3t.
Tamper in part.
AC loss delay
CA-64 EPSi (v. 2.00/2.01)
No autorst.3t.
Tamper in part.
EOL Rp resistor
AC loss delay
CA-64 EPSi (v. 4.00)
No autorst.3t.
Tamper in part.
EOL R1 resistor
EOL R2 resistor
AC loss delay
INT-KNX
No autorst.3t.
Partition
KNX control
Out addresses
Outputs
Telegrams
Factory sets
INT-AV
INT-AV code
Verify s1A
Code=1tone s1A
Verify s1B
Code=1tone s1B
Verify s2A
Code=1tone s2A
Verify s2B
Code=1tone s2B
Options