Satel Integra Plus Series - Output Parameters; Output Functions

SATEL INTEGRA Plus 47
Fig. 6. "Outputs" window in the D
LOAD X program.
4.1 Output parameters
Output name – individual name of the output (up to 16 characters).
Output function (see: section O
UTPUT FUNCTIONS ).
Cut off time – time during which the output is active. The parameter is irrelevant for the
status indicating outputs.
4.2 Output functions
0. N OT USED
1. B
URGLARY – signals all burglary and panic alarms (from zones, keypad/expander tamper,
keypad Panic, etc.).
2. F
IRE / BURGLARY – signals the burglary and panic alarms (continuous sound) and the fire
alarms (intermittent sound).
3. F
IRE ALARM – signals the fire alarms (from fire zones and triggered from keypads).
4. K EYPAD ALARM – signals the alarms triggered from keypad: fire, medical (auxiliary) and
panic (except: silent panic alarm).