Satel Integra Plus Series - Page 43

SATEL INTEGRA Plus 41
16...31 C OUNTING C1...16 – the counting zones will signal an alarm when the number of
violations counted during a specified time period exceeds the set value (see: section
C OUNTERS p. 45). Violations of the counting zones in armed mode can be signaled at the
9. DAY A LARM , 12. S ILENT ALARM and 116. I NTERNAL S IREN outputs.
32. 24 H F IRE
33. 24 H F IRE – S MOKE
34. 24 H F IRE – C OMBUSTION
35. 24 H F IRE – W ATER FLOW ( FIRE )
36. 24 H F IRE – H EAT
37. 24 H F IRE – P ULL STATION
38. 24 H F IRE – D UCT
39. 24 H F IRE – F LAME
The zone types from 32 to 39 cause a fire alarm. The names of zones and codes of events
from these zones are consistent with the Contact ID reporting format. The fire zones (except
for 24 H F IRE – B UTTON ) can work with alarm verification.
40. 24 H F IRE SUPERVISORY
41. 24 H L OW WATER PRESSURE
42. 24 H L OW CO2
43. 24 H W ATER VALVE DETECTOR
44. 24 H L OW WATER LEVEL
45. 24 H P UMP ACTIVATED
46. 24 H P UMP FAILURE
47. N O ALARM ACTION – may be used to control the outputs. Additional options (S TORE TO
EVENT LOG
, N O REPORTING and S TORE EVENT ONLY IF ARMED ) enable the zone to be used for
other applications e.g. supervising the keybox.
48. 24 H AUXILIARY – P ROTECTION LOOP
49. 24 H AUXILIARY – G AS DETECTOR
50. 24 H AUXILIARY – R EFRIGERATION
51. 24
H AUXILIARY – L OSS OF HEAT
52. 24
H AUXILIARY – W ATER LEAKAGE
53. 24 H AUXILIARY – F OIL BREAK
54. 24 H AUXILIARY – L OW BOTTLED GAS LEVEL
55. 24 H AUXILIARY – H IGH TEMPERATURE
56. 24 H AUXILIARY – L OW TEMPERATURE
57. T ECHNICAL – D OOR OPEN – zone intended for supervising the status of the door defined as
D EPENDENT DOOR in the module executing the access control functions (partition keypad,
code lock, readers expander).
58. T ECHNICAL – D OOR BUTTON – zone violation will result in opening the door controlled by
the module executing the access control functions (partition keypad, code lock, readers
expander).
59. T ECHNICAL – AC LOSS – intended for control of devices working together with the alarm
control panel e.g. additional power supply units. Violation of the zone will cause a trouble
condition.
60. T
ECHNICAL – BATTERY LOW – intended for control of the batteries of additional power
supply units working in conjunction with the control panel. Violation of the zone will cause
a trouble condition.