Satel Integra Plus Series - Reporting parameters and options; Selection of the monitoring station

SATEL INTEGRA Plus 69
panel will make repeated monitoring attempts. If the event cannot be sent despite completion
of the preprogrammed number of retries, the control panel will hang up until a next event
occurs, or for a specified period of time. After the time expires, the control panel will make
further attempts to send the event.
The reporting parameters can be programmed:
 using the keypad, in the service mode, by means of the functions available in the
M ONITORING submenu;
 using the D LOAD X program, in the "Reporting" window.
For correct operation, the reporting function may require enabling some system options.
Fig. 11. Example of reporting settings in the D LOAD X program.