Satel PERFECTA 64 M - Setting an Exception; Timer Activation; Deactivation

SATEL PERFECTA 64 M 31
3. Press to confirm the selection. The list of editable timers will be displayed.
4. Press or to select from the list a timer.
5. Press to confirm the selection. The timer start and stop time will be displayed (if no
times are configured, you will see empty fields).
6. Enter a new timer start / stop time (hour:minutes). See: “Time setting rules”.
7. Press to confirm the changes.
Setting an exception
Setting the exception time period
1. Enter the user menu and press to start the 2.FROM function.
2. Use the or key to select from the list an exception.
3. Press to confirm the selection. The list of editable timers will be displayed.
4. Use the or key to select from the list a timer.
5. Press to confirm the selection. The exception start date will be displayed (if no date
is configured, you will see an empty field).
6. Enter a new date (year-month-day). See: “Date setting rules”.
7. Press to confirm the changes.
8. Press to start the 3.TILL function.
9. Use the or key to select from the list an exception.
10. Press to confirm the selection. The list of editable timers will be displayed.
11. Use the or key to select from the list a timer.
12. Press to confirm the selection. The exception end date will be displayed (if no date
is configured, you will see an empty field).
13. Enter a new date (year-month-day). See: “Date setting rules”.
14. Press to confirm the changes.
Setting the timer start / stop time for the exception
1. Enter the user menu and press to start the 9.EXCEPTIONS function.
2. Use the or key to select from the list an exception.
3. Press to confirm the selection. The list of editable timers will be displayed.
4. Use the or key to select from the list a timer.
5. Press to confirm the selection. The timer start / stop time for when the exception is
in effect will be displayed (if no times are configured, you will see empty fields).
6. Enter a new timer start / stop time (hour:minutes). See: “Time setting rules”.
7. Press to confirm the changes.
Timer activation / deactivation
1. Enter the user menu and press to start the 4.ACTIVE function.
2. The list of timers will be displayed (you will see the status of the first of the editable
timers). You can scroll up and down the list using the and keys. The symbol in
the upper right corner of the display indicates:
– inactive timer (it is not started / stopped),
– active timer (it is started / stopped at a set time).
3. Press any number key to change the currently shown symbol for another one.