SATEL PERFECTA 64 M 5
Alarm zone – the zone whose violation can result in the alarm being triggered. The alarm
zones can be either instant (violation will trigger the alarm at once) or delayed (violation
will only trigger the alarm after a defined period of time has elapsed, e.g. the entry delay).
Armed mode – the status of alarm system in which zone violation will trigger the alarm.
Code – a sequence of digits used for user authentication. It allows the user to operate the
alarm system by using keypad.
Day armed mode – the status in which only some zones in the partition are armed, as
selected by the installer. The indicated zones will be armed during the day, when the
user(s) stay in the protected area, but there is no risk of the zones being violated by the
user(s). If no such zones are indicated by the installer, this arming mode is unavailable.
Detector – the basic component of alarm system, which analyzes the environment and, if
a situation recognized as a threat occurs, transmits appropriate information to the control
panel (e.g. motion detectors on detecting motion, magnetic contacts on opening the
door/window, glass-break detectors on breaking glass pane, gas detectors on sensing
gas, etc.).
Entry delay – time counted from entering into the protected area, which makes it possible to
disarm the partition before the alarm is triggered.
Entry route – the route which the user must have to follow after entry into the protected area
before being able to disarm the system. It is usually the same as the exit route.
Exit delay – time counted from starting the arming procedure in the partition, which makes it
possible to leave the protected area before the alarm is triggered.
Exit route – the route which the user must have to take after arming before he leaves the
protected area. It is usually the same as the entry route.
Fire alarm – alarm triggered by fire detectors, or from the keypad, in the event of fire.
Full armed mode – the status in which all zones belonging to the partition are armed.
Installer – the person who has installed and configured the alarm system.
Medical (auxiliary) alarm – alarm triggered by means of a button, or from the keypad, if it is
necessary to call the medical assistance.
Night armed mode – the status in which only some zones in the partition are armed, as
selected by the installer. The indicated zones will be armed at night, when the user(s) stay
in the protected area, but there is no risk of the zones being violated by the user(s). If no
such zones are indicated by the installer, this arming mode is unavailable.
Panic alarm – alarm triggered by means of the panic button, or from the keypad, in case of
a hold-up.
Partition – a part of the protected area, composed of a number of zones. The division into
partitions makes it possible to limit the access to part of the premises to some selected
users, and to arm/disarm the system only in part of the protected area.
Protected area – the area supervised by detectors being part of the alarm system.
Proximity card – a passive transponder that can be used for user authentication if a device
that has a proximity card reader is installed in the alarm system. The transponder can be
a card, a tag, etc.
Reporting – reporting events that occurred in the alarm system to the monitoring station. The
information about occurrence of an event can be transmitted via cellular network. The
companies offering the alarm system monitoring service undertake to intervene if specific
events occur (e.g. alarms, troubles, etc.).
Service code – a code that allows access to the service mode, as well as some functions in
the user menu.
To Next Page
Loading...
