Satlink WS-7009 - Page 8

7
English
3.1.2 LOCAL FREQUENCY
Press
AB
key into the LNB list. Use
YZ
key to move the cursor then press OK to
select the LNB of you want.
3.1.3 TRANSPONDER
Press
AB
key into the TP list. Use
YZ
key
to move the cursor then press OK to select
the TP of you want.
3.1.4 FREQUENCY
Frequency of the current transponder, Input the value by using the number
keys.
3.1.5 SYMBOL RATE
Symbol rate of the current transponder, Input the value by using the number
keys.
3.1.6 POLARITY
Press
AB
key to change vertical or horizontal of polarization.
3.1.7 TONE
Press
AB
key to turn on or o 22kHz TONE Switch.
3.1.8 BEEP TONE
Press
AB
key to Switch beep tone. If we open the beep tone, the beep of
lock alarm will open when we enter into the search screen.
3.1.9 DISEQC MODE
Press
AB
key to set the type of port as diseqc1.0/1.1 or Unicable.