SATO CG4 Series Quick Guide

6
English
Turning On the Power
Power Setting
Plug the DC power cord of the AC adapter into the printer and turn on the
power.
1
Connect the AC power cord to the AC
adapter.
2
Connect the printer AC adapter
AC power outlet. When plugging the
DC power cord into the printer's power
connector, make sure the DC power
cord connector is oriented properly.
When plugging in the DC power cord
to the printer, use one hand to hold the
printer while using the other hand to
plug in the cord.
A
C power cord
A
C adapter
A
C power cord
A
C adapter
DC input power terminal
(Power connector)
DC input power terminal
(Power connector)
Make sure the flat side
of the DC power cord is
facing up.
Plug
DC power cord
Make sure the flat side
of the DC power cord is
facing up.
Plug
DC power cord
CG408412E.indb6CG408412E.indb6 2008/12/1514:24:072008/12/1514:24:07

SATO CG4 Series Specifications

General

Brand	SATO
Model	CG4 Series
Category	Printer
Language	English