SATO CG4 Series Quick Guide

8
English
Basic Specifi cations
Model name CG408DT CG412DT CG408TT CG412TT
Printing method Direct Thermal Thermal Transfer
(Direct Thermal/Thermal Transfer)
Head density
(Resolution)
203 dpi
(8-dot/mm)
305 dpi
(12-dot/mm)
203 dpi
(8-dot/mm)
305 dpi
(12-dot/mm)
Printing effective area 300 mm pitch x 104 mm wide
Unprintable area Label
Length direction Upper: 1.5mm Lower: 1.5mm
(Not including backing paper)
Width direction Left: 1.5mm Right: 1.5mm
(Not including backing paper)
Linerless label
Length direction Upper: 4.0mm Lower: 1.5mm
Width direction Left: 1.5mm Right: 1.5mm
Printing speed 50, 75 or 100 mm/sec
2, 3 or 4 inches/sec (Setting: 2, 3, 4)
* Printing speed differs depending on paper type and usage environment.
Paper type/
Paper shape
Roll paper (Face-out / Face-in winding)
Recommended use of paper manufactured or specifi ed by SATO.
Paper thickness 60 to 190μm (0.06 to 0.19 mm)
Label size Label
Continuous type
Pitch : 7 to 300 mm (Backing paper 10 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Cutter type
Pitch : 22 to 300 mm (Backing paper 25 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Dispenser type
Pitch : 22 to 100 mm (Backing paper 25 to 103 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Tear-off type
Pitch : 22 to 300 mm (Backing paper 25 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Linerless type (Label without backing paper)
Pitch : 22 to 100 mm
Width : 22 to 110 mm
Non-adhesive label
Continuous type
Pitch : 10 to 303 mm
Width : 25 to 110 mm
Cutter type
Pitch : 25 to 303 mm
Width : 25 to 110 mm
Tear-off type
Pitch : 25 to 303 mm
Width : 25 to 110 mm
*Some restrictions may apply to the paper sizes that can be used depending on the
type of paper, usage environment, and application.
CG408412E.indb8CG408412E.indb8 2008/12/1514:24:082008/12/1514:24:08

SATO CG4 Series Specifications

General

Brand	SATO
Model	CG4 Series
Category	Printer
Language	English