EasyManuals Logo

SATO CG4 Series Quick Guide

SATO CG4 Series
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
9
English
Model name CG408DT CG412DT CG408TT CG412TT
Outer diameter of
paper roll
Maximum ø128 mm
Inner diameter of paper roll core: ø40 mm (ø1.5 inches)
Ribbon size/
Ribbon type/
Ribbon winding
direction
Length: Maximum 100m
Width: 110 mm ± 0.5 mm
Outer diameter: Max.ø38 mm
(Inner diameter of ribbon core:
ø12.7 mm)
Winding direction: Face-out winding
Winding method: Ribbon core
winding method
*Recommended use of carbon ribbon
manufactured or specifi ed by SATO.
Label issuing
mode
Standard: Continuous mode, Tear off mode, Sensor-off mode
Option: Dispenser mode, Cutter mode, Linerless mode
Dimensions 179 (W) × 238 (D) × 173 (H) (mm)
* Excluding the protrusion portion.
Weight 1.7 kg
1.9 kg
Power
specifi cations
AC adapter
Input power voltage: AC 100 V to 240 V ±10% (full range)
Frequency: 50/60 Hz
Output power voltage: DC 19 V
Power consumption
Input power voltage conditions: AC 100 V
At peak: 50 W (at 30% printing ratio)
During standby: 2.5 W
Environmental
conditions (Temperature/
Humidity)
Operating environment: 4 to 38°C, 30 to 80 % RH (However, no condensation)
Storage environment: –10 to 60°C, 15 to 85 % RH (However, no condensation)
(Not including ribbon, labels, and other supplies.)
Interface Select one of the following (The factory will provide the unit with the
selected interface.)
1
USB (B type) and RS-232C (D-SUB 9-pin)
2
USB (B type) and LAN (10 BASE-T/100 BASE-TX auto switching)
3
USB (B type) and IEEE1284
Options Cutter unit, Dispenser unit (w/ dispenser paper sensor), RTC kit,
Non-cutter unit for linerless label, Simplifi ed input Keypad,
TSC Smart Keyboard, 1D barcode scanner
LED
1
ERROR: (Red)
2
ON LINE (POWER): (Green)
Operation button [POWER], [FEED/LINE]
Paper length
detection sensor
I-mark sensor (Reflective type)
Label gap sensor (Transmissive type)
Barcode UPC-A/UPC-E, JAN/EAN, CODE39, CODE93, CODE128, GS1-128
(UCC/EAN-128), CODABAR (NW-7), ITF, Industrial 2 of 5, Matrix 2 of 5,
BOOKLAND, MSI, POSTNET, GS1 DataBar (RSS)
* GS1 DataBar is the new version of RSS-14.
2D barcode PDF417(Ver. 2.4), MAXI code(Ver. 3.0), QR code, GS1 DataMatrix (ECC200)
CG408412E.indb9CG408412E.indb9 2008/12/1514:24:082008/12/1514:24:08

Other manuals for SATO CG4 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CG4 Series and is the answer not in the manual?

SATO CG4 Series Specifications

General IconGeneral
BrandSATO
ModelCG4 Series
CategoryPrinter
LanguageEnglish

Related product manuals