SATO CG408TT Quick Guide

6
English
Turning On the Power
Power Setting
Plug the DC power cord of the AC adapter into the printer and turn on the
power.
1
Connect the AC power cord to the AC
adapter.
2
Connect the printer AC adapter
AC power outlet. When plugging the
DC power cord into the printer's power
connector, make sure the DC power
cord connector is oriented properly.
When plugging in the DC power cord
to the printer, use one hand to hold the
printer while using the other hand to
plug in the cord.
A
C power cord
A
C adapter
A
C power cord
A
C adapter
DC input power terminal
(Power connector)
DC input power terminal
(Power connector)
Make sure the flat side
of the DC power cord is
facing up.
Plug
DC power cord
Make sure the flat side
of the DC power cord is
facing up.
Plug
DC power cord
CG408412E.indb6CG408412E.indb6 2008/12/1514:24:072008/12/1514:24:07

SATO CG408TT Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Max Print Width	104 mm
Memory	8MB Flash ROM, 16MB SDRAM
Print Speed	4 ips
Media Sensor	Reflective and Transmissive
Interface	USB, RS232C
Optional Interfaces	Ethernet
Media Type	Roll, Fanfold
Media Width	22 mm to 118 mm
Media Thickness	0.06 mm - 0.2 mm
Ribbon Width	40 mm to 110 mm
Power Supply	AC 100-240V, 50/60 Hz