To Next Page
A
adamskevinJul 26, 2025
What to do if SATO GL408e Printer tag failed?
- BBreanna HoustonJul 26, 2025
If the SATO printer tag fails, consider these potential causes and solutions: 1. **Misaligned Label**: Perform the Auto Calibrate procedure to ensure the label is at the top-of-form. 2. **Media Issues**: Verify that you're using smart labels with RFID tags correctly positioned. 3. **Defective RFID Tag**: Try using another tag to rule out a faulty tag. 4. **Application Error**: Ensure the application sends the correct number of digits to the RFID tag.
General
